Usb/Digital Media Board - HP Compaq 6730b Maintenance And Service Manual

USB/digital media board

Description
USB/digital media board (includes cable)
Before removing the USB/digital media board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
f. Top cover (see
Remove the USB/digital media board cable:
1. Disconnect the USB/digital media board cable (1) from the system board.
2. Remove the two Phillips PM2.5×5.0 screws (2) that secure the USB/digital media board to the base
enclosure.
3. Remove the USB/digital media board (3).
Battery on page 46).
Hard drive on page 52)
Optical drive on page
Keyboard on page 60)
Switch cover on page
Display assembly on page
Top cover on page 80)
55)
65)
74)
Component replacement procedures
Spare part number
486249-001
89