Bluetooth Module - HP Compaq 6730b Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 487138-001. See
for more Cable Kit spare part number information.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the Bluetooth module:
1. Position the computer with the front toward you.
2. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the Bluetooth module compartment
cover to the base enclosure.
3. Lift the rear edge of the Bluetooth module compartment cover (2), swing it forward, and remove
the cover. The Bluetooth module compartment cover is available in the Plastics Kit, spare part
number 486292-001.
4. Release the Bluetooth module (1) from the Bluetooth module compartment as far as the Bluetooth
module cable allows.
50 Chapter 4 Removal and replacement procedures
Battery on page 46).
Cable Kit on page 28
Spare part number
490809-001