System Board - HP Compaq 6530b Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
Description
For use only with HP Compaq 6535b computer models equipped with both WLAN and WWAN
modules
For use only with HP Compaq 6535b computer models equipped with a WLAN module but not a
WWAN module
For use only with HP Compaq 6530b computer models equipped with both WLAN and WWAN
modules
For use only with HP Compaq 6530b computer models equipped with a WLAN module but not a
WWAN module
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Fan (see
f. Heat sink (see
g. Display assembly (see
h. Top cover (see
i. ExpressCard board (see
j. Audio board (see
k. Speaker (see
l. Rear cover (see
m. SIM connector board (see
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Fan on page 66)
Heat sink on page
Display assembly on page
Top cover on page
ExpressCard board on page
Audio board on page
Speaker on page
Rear cover on page
SIM connector board on page
46).
52)
55)
61)
65)
68)
74)
81)
86)
87)
91)
93)
Component replacement procedures
Spare part number
488193-001
488194-001
486247-001
486248-001
95)
99