HP Compaq 6530s Maintenance And Service Manual page 97

4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speakers (see
f. Display assembly (see
g. Top cover (see
h. System board (see
Remove the processor:
NOTE: Steps 1 through 3 apply only to HP Compaq 6530s and 6531s models. See steps 4 and 5 for
instructions on removing the processor on HP Compaq 6535s models.
1. Turn the system board upside down, with the USB connectors toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned
with the triangle (4) embossed on the processor socket.
NOTE: Steps 4 and 5 apply only to HP Compaq 6535s models. See steps 1 through 3 for
instructions on removing the processor on HP Compaq 6530s and 6531s models.
4. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
Battery on page 46).
Hard drive on page 47)
Optical drive on page
Switch cover and keyboard on page
Switch cover and keyboard on page
Speakers on page 61)
Display assembly on page
Top cover on page 68)
System board on page
55)
57)
57)
62)
79)
Component replacement procedures 89