Modem Module - HP Compaq 2710p Maintenance And Service Manual

Modem module

NOTE:
All modem module spare part kits include a modem module cable.
Description
For use in all countries and regions except Australia, Brazil, and New Zealand
For use only in Australia and New Zealand
For use only in Brazil
Before removing the modem module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive compartment cover (see
a.
Keyboard (see
b.
Hinge cover (see
c.
Top cover (see
d.
Display assembly (see
e.
System board (see
f.
Remove the modem module:
Turn the system board upside down, with the front toward you.
1.
Remove the two Phillips PM2.5×4.0 screws (1) that secure the modem module to the system board.
2.
Lift the modem module (2) straight up to disconnect it from the system board.
3.
68 Chapter 4 Removal and replacement procedures
Battery on page 37).
Hard drive on page
Keyboard on page 48)
Hinge cover on page
Top cover on page 52)
Display assembly on page
System board on page
39)
50)
60)
63)
Spare part number
443899-001
443899-011
443900-001