Speaker - HP Compaq 2710p Maintenance And Service Manual

Remove the Bluetooth module and cable (4) from the base enclosure.
4.
Reverse this procedure to install the Bluetooth module.

Speaker

Description
Speaker
Before removing the speaker, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive compartment cover (see
a.
Keyboard (see
b.
Hinge cover (see
c.
Top cover (see
d.
Audio connector board (see
e.
Bluetooth module (see
f.
58 Chapter 4 Removal and replacement procedures
Battery on page 37).
Hard drive on page
Keyboard on page 48)
Hinge cover on page
Top cover on page 52)
Audio connector board on page
Bluetooth module on page
39)
50)
56)
57)
Spare part number
454695-001