Top Cover - HP Compaq 2710p Maintenance And Service Manual

Top cover

Description
Top cover (includes LED board and cable and display alignment guides)
Before removing the top cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive compartment cover (see
a.
Keyboard (see
b.
Hinge cover (see
c.
Remove the top cover:
Turn the computer upside down, with the front toward you.
1.
52 Chapter 4 Removal and replacement procedures
Battery on page 37).
Hard drive on page
Keyboard on page 48)
Hinge cover on page
39)
50)
Spare part number
454683-001