HP Compaq 2230s Maintenance And Service Manual page 82

Select
Built-In Device Options
Port Options (all are enabled by default)
Set Security Level
Restore Security Defaults
Computer Setup
To do this
■ Enable/disable the wireless button state (enabled by default).
■ Enable/disable embedded WWAN device radio (select models only; enabled
by default).
■ Enable/disable embedded Bluetooth® device radio (enabled by default).
■ Enable/disable the Network Interface Controller (LAN) (enabled by default).
■ Set the wake on LAN state. Options include the following:
❐ Disabled
❐ Boot to Network (set by default)
❐ Follow Boot Order
■ Enable/disable the fingerprint device (enabled by default).
■ Enable/disable a modem device (enabled by default).
■ Enable/disable the embedded WLAN device (enabled by default).
■ Enable/disable LAN/WLAN switching (disabled by default).
■ Enable the ambient light sensor (enabled by default).
■ Enable/disable the Notebook Multibay device (enabled by default).
■ Enable/disable the integrated camera (select models only; enabled
by default).
✎
All port options are enabled by default.
■ Enable/disable the Smart Card slot.
■ Enable/disable the ExpressCard slot.
■ Enable/disable the serial port.
■ Enable/disable the parallel port.
■ Enable/disable the flash media reader.
■ Enable/disable the USB port.
Ä
Disabling the USB port also disables MultiBay devices and ExpressCard
devices on the advanced port replicator.
■ Enable/disable the 1394 port.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.
5–5