Memory Module - HP Compaq 2230s Maintenance And Service Manual

Memory module

Description
2048-MB (PC2-5300, 667-MHz, DDR2)
1024-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Position the computer with the front toward you.
2. Loosen the four Phillips PM2.0×5.0 captive screws 1 that secure the cover to the computer.
3. Place your finger in the tab area 2 on the rear edge of the hard drive cover and lift it up and forward 3 to
remove the cover. The memory module cover is included in the Plastics Kit, spare part number 493274-001.
Removal and replacement procedures
"Battery" on page 4-7).
Spare part number
493195-001
493194-001
4–10