HP Compaq 2210b Maintenance And Service Manual page 61

If it is necessary to replace the display bezel or the display assembly internal components, remove
9.
the six rubber screw covers (1) and the six Torx T8M2.5×6.0 screws (2) that secure the display
bezel to the display enclosure.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
10.
bezel until the bezel disengages from the display enclosure.
Remove the display bezel (3). The display bezel is available using spare part number
11.
455400-001.
If it is necessary to replace the display inverter, release the inverter (1) as far as the display panel
12.
cable and backlight cable allow.
Component replacement procedures 53