Interfaces And Controllers; Power Source; Environmental Specifications - HP Compaq 100 Reference Manual

Interfaces and Controllers

VGA Controller
High performance flat panel CRT/LCD VGA controller, supports TFT/DSTN
LCD panel, AGP 2X mode, up to 1024 x 768 (XGA) resolution
Parallel Port
Standard/ECP/EPP parallel communication interface with a DB-25 female
connector
Serial Ports
COM1 and COM2 assigned to two of the followings:
RS-232C communication interface with a 9-pin D-type shell connector
Fax/Modem Card
IrDA 1.0/ASK communication interface
Auxiliary Device Port
A 6-pin miniature DIN connector for a PS/2-compatible keyboard or mouse
PC Card Slots
Compliant with PCMCIA 2.1/JEIDA 4.1 specifications along with ExCA
extension and PC CARD standard, one PC Card slot for one Type I, Type II
or Type III application supporting CardBus
Audio Subsystem
Supports 3D sound and wavetable capacity, fully compatible with Microsoft
Windows Sound System, legacy compatible with DOS sound system

Power Source

AC Adapter
Switched power supply with a separate AC power cord; full range voltage
between 100V 240V; frequency 50 60Hz
Output voltage DC 18.5V, with over-current and overcharging protection
Battery Pack
NiMH, 9 cells, 4/3 AU type, 1.2V per cell (standard)
Li-ion, 8 cells, UR18650 type, 3.7V per cell (optional)

Environmental Specifications

Operating 10 o C (50 o F) to 35 o C (95 o F)
Storage 0 o C (32 o F) to 60 o C (140 o F)
A-2
Temperature Range Relative Humidity
20% to 80% non-condensing
10% to 90% non-condensing
Specifications