Power Button Function - HP Compaq 100 Reference Manual

Suspend Controls
The "Suspend Controls" item lets you micromanage several suspend features.
When this item is selected, the submenu will display as shown below.

Power Button Function:

Lid Switch Function:
( ) Suspend To Disk
( ) Suspend To RAM
The followings describe in sequence all the items of this submenu.
Power Button Function
This item sets the function of the power button. The available options are
Power On/Off and Suspend/Resume.
NOTE: When this item is set to "Suspend/Resume", you can turn off the
power by pressing the button for 5 seconds.
Lid Switch Function
This item sets the sequential event when the top cover is closed while power is
on. The available options are Blank LCD and Suspend/Resume.
Suspend Type
This item sets the suspend mode the system will enter if it stays inactive for the
timing set in the "Suspend Timeout" item (see "Suspend Timeout" in "Timeout
Settings" menu). The available options are Suspend To Disk and Suspend To
RAM.
Ring Resume
The "Ring Resume" item enables or disables the system's waking up from
Suspend-to-RAM mode when the modem receives an incoming call.
When this item is selected, no submenu will display. A check mark ( ) indicates
Enabled; an underline (_) indicates Disabled.
The default setting is Disabled.
5-14
Power On/Off
Blank LCD
Setup Configuration Utility