Table of Contents
Advertisement
Keyboard Repeat
The "Keyboard Repeat" item sets the repeat rate and delay time of key strokes.
When this item is selected, the submenu will display as shown below.
( ) 2 cps
( ) 6 cps
( ) 10 cps
( ) 15 cps
( ) 20 cps
( ) 30 cps
The "Key Repeat Rate" sets the repeat rate when you hold down a key, while
the "Key Delay" item sets the delaying time between key repeats.
Power Menu
The Power pull-down menu, as shown below, contains the Power Management
settings which help save power.
Power
Enable Power Saving
Timeout Settings
Suspend Controls
_ Ring Resume
Resume Timer
Advance CPU Controls
The followings describe in sequence all the items of the Power menu.
Enable Power Saving
The "Enable Power Saving" item is the master control for the Power
Management features. If this item is disabled, all Power menu items except
"Suspend Controls" will be automatically disabled.
When this item is selected, no submenu will display. A check mark ( ) indicates
Enabled; an underline (_) indicates Disabled.
The default setting is Enabled.
Timeout Settings
This item lets you set up the timeout functions for power saving purpose.
NOTE: Some operation systems, such as Windows98, have built-in
APM/ACPI configurations which could possibly override these settings.
Setup Configuration Utility
( ) 1/4 sec
( ) 1/2 sec
( ) 3/4 sec
( ) 1 sec
5-11
Advertisement
Table of Contents
