Set Admin Password; Set User Password - HP Compaq 100 Reference Manual

Set Admin Password

This item lets you set up administrator-level password.
When this item is selected, the submenu will display as shown below.
Enter old ADMIN password:
Enter new ADMIN password:
Verify new ADMIN password: . . . . .
[X] Boot System
[X] Enter SCU
You can directly enter the new password if no password has previously existed.
If a password has been previously set up, you have to enter the correct old
password before setting up a new one. In either case, you have to enter the
new password twice to complete the setting.
NOTE:
1. If you want to clear a previous password, you can enter the old
password and leave the following fields blank.
2. The administrator password is required for booting and e ntering
SCU, so the "Verify password when..." setting can not be changed.

Set User Password

This item lets you set up user-level password.
When this item is selected, the submenu will display as shown below.
Enter old User password:
Enter new User password:
Verify new User password: . . . . .
[X] Boot System
[ ] Enter SCU
[ ] Resume System
Setup Configuration Utility
. . . . .
. . . . .
. . . . .
. . . . .
5-5