Moving Around And Making Selections; Using The Touchpad/Mouse - HP Compaq 100 Reference Manual

Startup Memory Disks
Floppy Drive A = 1.44 Mb
Floppy Drive B = None
Hard Drive C
Hard Drive D
Hard Drive E
Hard Drive F
Serial Port 1
Serial Port 2
Parallel Port
The SCU screen is divided into three areas:
On the top line of the screen is the menu bar, which lists the titles of the
available menus. Each menu title contains a pull-down menu, which
displays items for settings.
The middle section of the screen displays current settings of the system. If
you open a pull-down menu and select an item that provides multiple
options, a submenu will pop up and let you make further selections.
The bottom window provides alternative information. Normally it gives the
keyboard/mouse instructions for moving around and making selections.
When a menu item is highlighted, the window will provide more detailed
description of the item.

Moving Around and Making Selections

You must go through two or three levels to complete the setting for an item. In
most cases, there are three levels: menu title, pull-down menu, and submenu.
To move around and make selections, you can use both the TouchPad/mouse
and keyboard.

Using the TouchPad/Mouse

Using the TouchPad or mouse is recommended. It is more straightforward than
using the keyboard.
For most items, simply move the pointer with the TouchPad/mouse and left-click
on the intended item. To cancel your selection, click the right button. For some
items, you will need to select with the arrow keys.
5-2
Components
= 2067 MB
= 0 MB
= 0 MB
= 0 MB
= COM1, 3F8, IRQ 4
= COM2, 2F8, IRQ 3
= LPT1, Addr 378, IRQ 7
Figure 5-1. Main SCU Screen
Power Exit
CPU Clock
Base
Extended
Shadow
Reserved
Total RAM
Cache (Ext)
Setup Configuration Utility
= 350 MHz
= 640 KB
= 56320 KB
= 64 KB
= 320 KB
= 57344 KB
= 1024 KB