HP Compaq 100 Reference Manual page 17

Use the following procedure to insert or remove a CD-ROM.
1. Turn on the notebook.
2. Push the eject button
slides out partially, gently pull it until fully extended.
3. To insert a CD-ROM, place the CD-ROM in the tray with its label facing up.
To remove a CD-ROM, hold the disc by its outer edge and lift it up from the
tray.
4. Slide the tray back into the drive bay.
Manually Releasing a CD-ROM
In the unlikely event that you are unable to release the CD-ROM tray by
pressing the eject button, you can manually release the tray as follows:
1. Turn off the system.
2. Insert a small rod into the manual eject hole
firmly to release the tray.
3. Pull the tray out until the tray is fully extended, then remove the CD-ROM.
Keyboard
Your notebook keyboard has all the functions of a standard AT-enhanced
keyboard plus some keys specific to your notebook.
2-4
and the CD-ROM tray will slide out. If the tray only
Figure 2-3. Inserting a CD-ROM
2
1
(see Figure 2-3) and push
Using the Notebook