14.4 VOLT IMPACT DRIVER KIT 1/4” HEX DRIVE Model 92472 OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. ®...
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. SKU 92472 For technical questions, please call 1-800-444-3353 PRODUCT SPECIFICATIONS Description Power Output Source: 14.4 VDC Battery...
7. Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. SKU 92472 For technical questions, please call 1-800-444-3353 ELECTRICAL SAFETY...
1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of SKU 92472 For technical questions, please call 1-800-444-3353 TOOL USE AND CARE...
Page 5
Never burn the Battery, as it can explode in a fire. Do not charge the Impact Driver with a leaking Battery. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery.
NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 11. WARNING! Always make sure the Trigger (34) of the Impact Driver is in its “OFF” SKU 92472 For technical questions, please call 1-800-444-3353...
Page 7
Impact Driver. To change the rotational direction, make sure the Impact Driver is at a complete stop. While holding the tool in your hand, for a clockwise rotation, move the Lever to the right . For a counterclockwise rotation, move the Lever to the left .
Battery and/or Charger (46) will occur. (See Figure A.) 3. Make sure the Trigger (34) on the Impact Driver is in its “OFF” position. Slide the Battery (40) off the Handle of the Impact Driver. Next, insert the Battery onto the Charging Socket of the Charger (46).
Battery. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery. 4. Daily: With a soft brush or cloth, remove all dirt and debris from the Impact Driver. Do not immerse the Impact Driver in any liquids.
5. When storing: Always remove the Battery (40) from the Impact Driver. Keep the Impact Driver and its accessories in a clean, dry location and out of children’s reach. CAUTION! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician.