Removing the Expansion Slot Cover
WARNING:
!
allow the internal system components to cool before touching them.
CAUTION:
components. Before beginning this procedure, ensure that you are
properly grounded. Refer to Appendix C, "Electrostatic Discharge."
To remove the expansion slot cover, follow these steps:
1. Find the two expansion slot covers 1 and 2 on the right side
of the expansion base. You can install a PCI expansion board
or an ISA expansion board in either the top or the bottom slot.
Select the slot you want to use.
Identifying the Expansion Slot Covers
9-4 Installing and Removing an Expansion Board
To reduce the risk of personal injury from hot surfaces,
Electrostatic discharge (ESD) can damage electronic