Using a Drive Adapter
Armada 7000 Hard Drive MultiBay Adapter
To insert a hard drive into an Armada 7000 Hard Drive
MultiBay Adapter
1. If the hard drive is in a packing or storage tray, remove it from
the tray and from any other packing materials.
2. Push the slide tab back 1.
3. Place the hard drive 2 into the adapter with the connector
facing in.
4. Slide the hard drive toward the connector 3 in the adapter
until both connectors are fully engaged.
5. Release the slide tab.
Placing a Hard Drive in an Armada 7000 Hard Drive MultiBay Adapter
To remove a hard drive from an Armada 7000 Hard Drive
MultiBay Adapter
1. Push the slide tab back to release the hard drive.
2. Pull the drive away from the connectors, then lift it out of
the adapter.
7-6 Using Removable Drives