Inserting a Battery Pack into a MultiBay
To insert a battery pack into a desktop expansion base MultiBay,
follow these steps:
1. Determine the model of the battery pack.
An Armada 7700 battery pack has a rectangular label that
partially covers the top of the battery pack.
An Armada 7300 battery pack has a large label that covers
the top of the battery pack.
2. Unlock the expansion base keylock.
3. Insert the battery pack with the connector 1 facing in.
Insert an Armada 7700 battery pack label side up.
Insert an Armada 7300 battery pack label side down.
4. Push the battery pack into the MultiBay until it is seated and
the MultiBay device release latch 2 slides to the right.
Inserting a Battery Pack into a Desktop Expansion Base MultiBay
Removing a Battery Pack from a MultiBay
To remove a battery pack from an expansion base MultiBay,
follow these steps.
1. Unlock the expansion base keylock.
2. Slide the MultiBay device release latch to the left.
3. Pull the battery pack out of the MultiBay.
6-2 Charging Battery Packs