Table of Contents
Advertisement
Docking the Computer
WARNING:
!
hands away from the rear of the computer when docking.
CAUTION:
is docked.
Compaq recommends that you save and close all files and
applications before docking.
To dock the computer in the desktop expansion base, follow
these steps:
1. Turn off the computer, unless it is running Windows 95.
2. Turn off then disconnect any external equipment connected to
the computer. Disconnect cables to any installed PC Cards.
3. Slide the computer into the expansion base along the left
alignment guide 1.
4. Push the computer toward the rear of the expansion base until
the docking connector on the computer 2 contacts the docking
connector on the expansion base 3. This activates the
motorized docking mechanism, which pulls the computer into
a fully seated connection.
Docking the Computer in the Desktop Expansion Base
To avoid the risk of personal injury, keep fingers and
Do not turn the computer on for the first time while it
Docking and Undocking 4-3
Advertisement
Table of Contents
