Connecting to an Ethernet Network
To connect the system to a 10BaseT Ethernet network
First, connect the system to the network with a network cable.
Second, install the drivers for your operating system.
To connect the system to a 100BaseTX Ethernet network, you
must first install an optional 100BaseTX Ethernet Module. For
information, refer to "Worldwide Telephone Numbers" in
Appendix A for a Compaq authorized dealer, reseller, or service
provider near you.
Installing an optional 100BaseTX Ethernet Module in a
NOTE:
system connected to a 10BaseT Ethernet network will not affect
system or network speed.
Getting Connected 3-11