Connecting the Expansion Base Power Cord
To connect the desktop expansion base to electrical power, follow
these steps:
1. Set the voltage select switch
your electrical service provider. When 115 VAC is selected ,
the number 115 is visible on the red portion of the switch.
When 230 VAC is selected , the number 230 is visible.
NOTE:
your electrical service provider.
CAUTION:
position (115 VAC or 230 VAC). Failure to do so will result in
damage to the equipment.
Setting the Voltage Select Switch
1-6 Getting Started
To verify the voltage of your electrical supply, contact
Ensure that the voltage select switch is in the correct
to the voltage supplied by