Removing a Drive from the MultiBay Adapter
That Has Two Release Latches
To remove a drive from the Armada 7000 Removable Drive
MultiBay Adapter that has two release latches on the bottom:
1. Slide the two release latches on the bottom of the adapter away
from the center of the adapter until they click into the
unlocked position
2. Push forward on the back of the drive
connector) until you can grasp the front of the drive.
3. Remove the drive from the adapter
4. Slide the two release latches toward the center of the adapter
until they click into the locked position
Store the adapter in the MultiBay device carrying case.
NOTE:
Removing a Drive from a MultiBay Adapter That Has Two Release Latches
.
Working with Removable Drives 6-11
(without touching the
.
.