Removing a Drive from the MultiBay Adapter
That Has One Release Latch
To remove a drive from the Armada 7000 Removable Drive
MultiBay Adapter that has one release latch on the right side:
1. Apply light pressure to both the top and bottom of the release
latch on the right side of the adapter and pull it out slightly
2. Push forward on the back of the drive
connector) until you can grasp the front of the drive.
3. Slide the drive out of the adapter
Store the adapter in the MultiBay device carrying case.
NOTE:
Removing a Drive from a MultiBay Adapter That Has One Release Latch
6-10 Working with Removable Drives
(without touching the
.
.