Table of Contents
Advertisement
AUSTEL Requirements
CAUTION:
software used with the modem, to the values contained in the
Telephone Answering Machine documentation will result in the
modem being operated in a non-compliant manner. Consequently,
there would be no permit in force for this equipment, and the
Telecommunications Act 1991 prescribes a penalty of $12,000 for
the connection of non-permitted equipment.
Auto Dialing with the Modem
1. When entering telephone numbers, ensure that the number that
appears on the screen is correct before beginning to dial.
2. Some parameters required for compliance with AUSTEL
specifications are dependent on the Telecommunications
apparatus provided with the Compaq 2910 series of
computers. The Compaq series 577 global modem shall be set
to operate within the following limits for compliance with
AUSTEL Specifications.
When the user manually initiates a call via equipment
connected to the Compaq personal computer, the equipment
shall operate within the following restrictions:
a. Without call progress detection—a maximum of three calls
(original plus two retries).
b. With call progress detection (which ensures the line will be
released after detection of tones indicating the call will not
be successful)—a maximum of ten calls (original plus nine
retries).
c. If the series of calls noted in a or b are unsuccessful, no
further attempts shall be made to obtain the required
number within the next 30 minutes (unless manually
initiated).
NOTE: Failure to meet the above requirements may negate user
rights under the AUSTEL Terms of Service.
B-10 Regulatory Notices
Failure to set the modem, and any communications
Hide quick links:
Advertisement
Table of Contents
