Setting Up The Computer - HP Armada 7300 Reference Manual

4. With the label on the battery pack facing up and the battery
contacts facing in, reinsert the battery pack into the battery bay
until it clicks into place.
Reinserting the Battery Pack into the Battery Bay

Setting Up the Computer

1. Place the computer on a flat surface near a grounded electrical
outlet.
2. Plug one end of the power cord into the AC Adapter
other end into a grounded electrical outlet
Adapter into the power connector on the rear panel of the
computer
NOTE:
battery pack is charging, remove and reinsert the battery pack.
Allow the battery pack to fully charge (the battery light turns
off) before disconnecting external power or removing the
battery pack. You can use the computer while it charges the
battery pack.
1-4 Getting Started
.
If the battery light does not turn on to indicate the
and the
. Plug the AC