Table of Contents
Advertisement
6. Verify that Computer Checkup correctly detected the devices
installed.
NOTE:
or may be reported inaccurately.
a. If the list is correct, select OK. The test option menu is
displayed again. Go to step 7.
b. If the list is incorrect, ensure that any new devices are
installed properly. If you do not find an installation
problem, call your Compaq authorized service provider.
7. Select one of the following from the test option menu:
Quick Check Diagnostics. Runs a quick, general test on each
device with a minimal number of prompts. If errors occur,
they are displayed when the testing is complete.
Automatic Diagnostics. Runs unattended, maximum testing
of each device with minimal prompts. You can choose how
many times to run the tests, to stop on errors, or to print or
save a log of errors.
Prompted Diagnostics. Allows maximum control over the
device testing process. You can choose attended or
unattended testing, decide to stop on errors, or choose to
print or save a log of errors.
8. Follow the instructions on the screen to test the devices.
16-4 Computer Setup and Diagnostics Utilities
Devices from other manufacturers may not be detected
Hide quick links:
Advertisement
Table of Contents
