Software Security; Establishing A Power-On Password - HP Armada 7300 Reference Manual

Software Security

Establishing a Power-On Password

The power-on password prevents unauthorized use of the
computer. After you establish a power-on password, you must
enter it each time you turn on the computer. You can establish a
power-on password within Windows or in Computer Setup.
In Windows, double-click the Passwords icon in Control
Panel, click the Computer Security tab, then click the Set
button.
To run Computer Setup, turn on or restart the computer and
press F10 when the cursor appears in the upper-right corner of
the screen. Select Computer SetupÆSystem FeaturesÆ
Security Management.
Type your password carefully because it does not display as you
type. If you want, you can use the same password for power-on
and for setup.
The password can be up to seven alphanumeric characters. It is not
case sensitive; however, you must use the same keys each time.
For example, the system will not accept numbers typed with the
top row of keys if your password was typed with numbers within
the embedded numeric keypad.
After you enter a power-on password, you can select to enable the
options QuickLock, QuickBlank, and QuickLock when in
Suspend.
IMPORTANT:
forget your password, you cannot use the computer until the
computer memory is cleared of the password. Contact your
Compaq authorized dealer, reseller, or service provider for
assistance.
The next time you start the computer, a password prompt appears.
If you enter the password incorrectly, you are prompted to reenter
it. After three unsuccessful attempts, you must turn off the
computer, then turn it on again before you can continue.
14-2 Security Features
Record your password and put it in a safe place. If you