Table of Contents
Advertisement
Error Code Description
600-xx
Diskette ID drive types test
failed.
601-xx
Diskette format failed.
602-xx
Diskette read test failed.
603-xx
Diskette write/read/compare test failed.
604-xx
Diskette random read test failed.
605-xx
Diskette ID media test failed.
606-xx
Diskette speed test failed.
609-xx
Diskette reset controller test failed.
610-xx
Diskette change line test failed.
697-xx
Diskette type error
698-xx
Diskette drive speed not within limits.
699-xx
Diskette drive/media ID error
Error Code Description
1101-xx
Serial port test failed.
Error Code Description
1701-xx
Hard drive format test failed.
1702-xx
Hard drive read test failed.
1703-xx
Hard drive write/read/compare test failed. 3. Replace the hard drive and retest.
1704-xx
Hard drive random seek test failed.
1705-xx
Hard drive controller test failed.
1706-xx
Hard drive ready test failed.
1707-xx
Hard drive recalibration test failed.
1708-xx
Hard drive format bad track test failed.
1709-xx
Hard drive reset controller test failed.
1710-xx
Hard drive park head test failed.
1715-xx
Hard drive head select test failed.
1716-xx
Hard drive conditional format test failed.
1717-xx
Hard drive ECC* test failed.
1719-xx
Hard drive power mode test failed.
1724-xx
Network preparation test failed.
1736-xx
Drive monitoring test failed.
* ECC = Error Correction Code
2-12 Troubleshooting
Table 2-8
Diskette Drive Error Codes
Recommended Action
The following steps apply to error codes 600-xx
through 698-xx:
1. Replace the diskette.
2. Replace the diskette drive and retest.
3. Replace the system board and retest.
1. Replace media.
2. Run Compaq Utilities.
Table 2-9
Serial Test Error Codes
Recommended Action
1. Check port configuration.
2. Replace the system board and retest.
Table 2-10
Hard Drive Test Error Codes
Recommended Action
1. Run Compaq Utilities and verify drive type.
2. Verify that all secondary drives have
secondary drive capability.
4. Replace the system board and retest.
Advertisement
Table of Contents
