Starting Computer Setup - HP Compaq NX6315 Setup Manual

1

Starting Computer Setup

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system
is not working or will not load.
NOTE:
your computer.
NOTE:
navigate and make selections.
NOTE:
legacy support is enabled.
To start Computer Setup, follow these steps:
1. Turn on or restart the computer.
2. Before Windows® opens and while the "F10=ROM Based Setup" message is displayed in the
lower-left corner of the screen, press f10.
ENWW
Some of the Computer Setup menu items listed in this guide may not be supported by
Pointing devices are not supported in Computer Setup. You must use the keyboard to
An external keyboard connected by USB can be used with Computer Setup only if USB
1