HP 2133 Mini-Note Maintenance And Service Manual page 86

Select
Device configurations
Built-in device options
Port options (Windows only)
78 Chapter 5 Computer Setup
To do this
◦
6th boot device: Network controller
● Swap the functions of the
●
Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:
◦
Use of a USB keyboard in Computer Setup even
when a your operating system is not running.
◦
Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
●
Enable/disable BIOS DMA data transfers.
● Enable/disable fan always on while connected to an AC
outlet.
●
Enable/disable data execution prevention.
● Enable/disable LAN power saving mode.
●
Enable/disable SATA Native Mode.
● Enable/disable Dual Core CPU.
●
Enable/disable HDD translation mode.
● Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth Device Radio.
● Enable/disable Network Interface Controller (LAN)
●
Enable/disable LAN/WLAN Switching.
● Enable/disable Wake on LAN.
●
Enable/disable the integrated camera (webcam)
● Enable/disable USB port.
●
Enable/disable ExpressCard slot.
fn key and left ctrl key.