Computer Setup Menus; File Menu; Security Menu - HP 2133 Mini-Note Maintenance And Service Manual

Computer Setup menus

The menu tables in this section provide an overview of the Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your
computer.

File menu

Select
System information
Restore defaults
Ignore changes and exit
Save changes and exit

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.
Select
Setup password (Windows only) or Administrator password
(Linux only)
Power-on password (Windows only)
Change administrator password
Password check (Linux only)
Password options
DriveLock passwords
76 Chapter 5 Computer Setup
To do this
● View identification information for the computer.
●
View specification information for the processor, cache
and memory size, and system ROM.
Replace the configuration settings in Computer Setup with the
original factory settings. (Password settings and security
settings are not changed when you restore the factory
settings.)
Cancel any changes entered during the current session. Then
exit and restart the computer.
Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect
when the computer restarts.
To do this
Enter, change, or delete a setup password.
Enter, change, or delete a power-on password.
Enter, change, or delete an Administrator password.
●
Enable/disable Always to always check for a password.
● Enable Setup to set the password.
●
Enable/disable stringent security.
● Enable/disable the password requirement on computer
restart.
●
Enable, change, or disable DriveLock on any computer
hard drive.
●
Enter, change, or disable DriveLock on an optional
MultiBay hard drive.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.