Bluetooth Module - HP 2133 Mini-Note Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth
module cable is included in the Plastics/Cable Kit, spare part number 483381-001 for model 2133,
511751-001 for model 2140. See
number information.
Description
For use in all countries and regions except Japan and Asia Pacific countries and regions
For use only Japan and Asia Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Hard drive or solid-state drive (see
c. Top cover (see
d. Audio board (see
Remove the Bluetooth module:
1. Detach the Bluetooth module (1) from the system board.
NOTE:
Plastics/Cable Kit on page 29
Battery on page
Keyboard on page
Top cover on page
Audio board (Model 2133 only) on page
The Bluetooth module is attached to the system board by double-sided tape.
for more Plastics/Cable Kit spare part
44).
45)
Mass storage device on page
52)
Component replacement procedures
Spare part number
398393-002
450066-001
49)
55)
57