Computer Setup Menus; File Menu; Security Menu - HP 2133 Mini-Note Maintenance And Service Manual

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your
computer.

File menu

Select
System information
Restore defaults
Ignore changes and exit
Save changes and exit

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.
Select
BIOS Administrator password
Change BIOS administrator password
Password check
Password Options
DriveLock Passwords
Notebook hard drive password status
60 Chapter 5 Computer Setup
To do this
● View identification information for the computer and the batteries in the
system.
●
View specification information for the processor, cache and memory size,
system ROM, video revision, and keyboard controller version.
Replace the configuration settings in Computer Setup with the original factory
settings. (Password settings and security settings are not changed when you
restore the factory settings.)
Cancel any changes entered during the current session. Then exit and restart the
computer.
Save any changes entered during the current session. Then exit and restart the
computer. Your changes go into effect when the computer restarts.
To do this
Enter, change, or delete a setup password.
Enter, change, or delete a BIOS Administrator password.
●
Enable/disable Always to always check for a password.
● Enable Setup to set the password.
●
Enable/disable stringent security.
● Enable/disable password requirement on computer restart.
●
Enable/disable DriveLock on any computer hard drive.
● Change a DriveLock user password or master password.
NOTE: DriveLock settings are accessible only when you enter Computer Setup
by turning on (not restarting) the computer.
Enable/disable hard drive password status visibility.