System Board - HP 2133 Mini-Note Maintenance And Service Manual

System board

NOTE: All system board spare part kits include an ExpressCard assembly, fan/heat sink, processor,
RTC battery, and replacement thermal material).
Description
Equipped with 1.6-GHz processor and only for use with WXGA displays
Equipped with 1.2-GHz processor and only for use with WXGA displays
Equipped with 1.0-GHz processor and only for use with WXGA displays
Equipped with 1.6-GHz processor
Equipped with 1.2-GHz processor
Equipped with 1.0-GHz processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Hard drive (see
c. Top cover (see
d. Audio board (see
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory module (see
●
WLAN module (see
Battery on page 32).
Keyboard on page 33)
Mass storage device on page
Top cover on page 39)
Audio board on page
Memory module on page
WLAN module on page
37)
41)
36)
49)
Component replacement procedures
Spare part number
482277-001
482276-001
482275-001
500755-001
398308-001
500754-001
45