HP 2133 Mini-Note Maintenance And Service Manual page 48

Hp 2133 mini-note: specifications

Hide thumbs Also See for 2133 Mini-Note:

Table of Contents

Lift the rear edge of the top cover (2) and swing it up and forward until it rests upside down in front

of the computer.

Disconnect the power switch board cable (1) from the system board.

Release the ZIF connector (2) to which the TouchPad cable is connected and disconnect the

TouchPad cable (3) from the system board.

10.

Disconnect the wireless on/off switch board cable (4) from the system board.

11.

Remove the top cover.

Reverse this procedure to install the top cover.

Chapter 4 Removal and replacement procedures

Table of Contents