Using Optional External Devices; Using Optional External Drives; Using The Expansion Port (Select Models Only) - HP 2000-210 Reference Manual

Using optional external devices

NOTE: For more information about required software and drivers, or to learn which computer port to
use, refer to the manufacturer's instructions.
To connect an external device to the computer:
CAUTION:
sure that the device is turned off and the AC power cord is unplugged.
1. Connect the device to the computer.
2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet.
3. Turn on the device.
To disconnect an unpowered external device, turn off the device, and then disconnect it from the
computer. To disconnect a powered external device, turn off the device, disconnect it from the
computer, and then unplug the AC power cord.

Using optional external drives

Removable external drives expand your options for storing and accessing information. A USB drive
can be added by connecting the drive to a USB port on the computer.
NOTE: HP external USB optical drives should be connected to the powered USB port on the
computer.
USB drives include the following types:
●
1.44-megabyte diskette drive
●
Hard drive module (a hard drive with an adapter attached)
●
External optical drive (CD, DVD, and Blu-ray)
●
MultiBay device

Using the expansion port (select models only)

The expansion port connects the computer to an optional docking or expansion device, so that
additional ports and connectors can be used with the computer.
NOTE: The computer has only one expansion port. The term expansion port 3 describes the type of
expansion port.
42 Chapter 5 External cards and devices
To reduce the risk of damage to the equipment when connecting a powered device, be