Chicago Electric 46804 Assembly And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Drill
  5. 46804
  6. Assembly and operating instructions manual

Chicago Electric 46804 Assembly And Operating Instructions Manual

Chicago 3/8" single speed, electric drill operating instructions 46804
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3/8" SINGLE SPEED, ELECTRIC DRILL
Model 46804
ASSEMBLY AND OPERATING INSTRUCTIONS
®
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
®
Copyright 2004 by Harbor Freight Tools
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 46804

Summary of Contents for Chicago Electric 46804

  • Page 1 3/8” SINGLE SPEED, ELECTRIC DRILL Model 46804 ASSEMBLY AND OPERATING INSTRUCTIONS ® TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com ® Copyright 2004 by Harbor Freight Tools .

  • Page 2: Product Specifications

    Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 46804 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS 120 VAC, 60 Hz, Single Phase, 3.8 Amps...

  • Page 3: Electrical Safety

    Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. SKU 46804 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY...
  • Page 4 If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. SKU 46804 For technical questions, please call 1-800-444-3353. TOOL USE AND CARE Page 4...

  • Page 5: Specific Safety Rules

    If unreadable or missing, contact Harbor Freight Tools for a replacement. Always wear safety impact goggles and heavy work gloves when using the Drill. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools.
  • Page 6 Let Bits cool before touching changing or adjusting them. Bits heat up dramatically while in use, and are capable of severe burns. Do not force the Drill. This tool will do the work better and safer at the speed and capacity for which it was designed.

  • Page 7: Grounded Tools: Tools With Three Prong Plugs

    Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A SKU 46804 For technical questions, please call 1-800-444-3353. GROUNDING WARNING!

  • Page 8: Double Insulated Tools: Tools With Two Prong Plugs

    DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Note: This Drill has a Two Prong Plug. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code.
  • Page 9 3.5 - 5.0 5.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 FIGURE C SKU 46804 For technical questions, please call 1-800-444-3353. (120 VOLT) EXTENSION CORD LENGTH 50 FEET 75 FEET *Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
  • Page 10 Drill. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes. CAUTION: Always make sure the Power Cord of the Drill is unplugged from its electrical outlet prior to making any adjustments to the tool.
  • Page 11 Note: When holding the drill in your hand, the Forward/Reverse Lever points to- ward the right and the unit will drill forward. When it is pointed to the left, the unit will drill in reverse. See FIGURE 1 on page 10. The Forward/Reverse Lever does not act as a locking mechanism.
  • Page 12 Maximum drilling depth capacity for metal is 3/8 of an inch. Plastic and plastic coated chipboard: Use high speed steel drill bits and refer to the wood drilling section on this page. Warning! If the bit jams in a workpiece, or if the drill stalls, stop the tool and immediatly inplug it.

  • Page 13: Inspection, Maintenance, And Cleaning

    Carbon Brushes (17) periodically. See the Assembly Drawing on page 15. Re- move the Brush Holder (16) on the side of the drill. Take the Carbon Brush (17) out of the Brush Holder (17). If it is dirty, use a pencil eraser to clean it. If it is worn, replace it and insert the Carbon Brush (17) into the Brush Holder (17).

  • Page 14: Parts List

    BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 46804 For technical questions, please call 1-800-444-3353. PARTS LIST Part No.

  • Page 15: Assembly Diagram

    ASSEMBLY DIAGRAM The Chuck Key (22) is not shown. NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 46804 For technical questions, please call 1-800-444-3353. Page 15...

Table of Contents