Table of Contents
Advertisement
11 Connecting hardware
Using a USB device
Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected
to the computer or an optional docking device.
Some USB devices may require additional support software, which is usually included with the
device. For more information about device-specific software, refer to the manufacturer's instructions.
The computer has 4 USB ports. A USB hub provides additional USB ports that can be used with the
computer.
NOTE:
To view the status of the USB ports, go to the USB Storage Options utility. For additional
information, refer to
Connecting a USB device
CAUTION:
▲
To connect a USB device to the computer, connect the USB cable for the device to the USB
port.
Securing USB ports
The USB Storage Options utility gives the network administrator control over which users can access
which USB ports on a local computer. With the USB Storage Options utility, you can perform the
following tasks:
●
Enable storage devices
●
Allow read-only access to devices
●
Disable storage devices
Securing USB ports on page
To prevent damage to a USB connector, use minimal force to connect a USB device.
51.
Using a USB device
51
Advertisement
Table of Contents
