Table of Contents
Advertisement
Right side
Component
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Power light
Drive light
Memory card reader
USB 3.x SuperSpeed port
Optical drive (select products only)
Optical drive eject button (select products only)
AC adapter and battery light
Description
On: The computer is on.
●
Blinking: The computer is in the Sleep state, a power-
●
saving state. The computer shuts off power to the display
and other unneeded components.
Off: The computer is off or in Hibernation. Hibernation is a
●
power-saving state that uses the least amount of power.
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the hard
●
drive.
NOTE:
For information about HP 3D DriveGuard, see
3D DriveGuard (select products only) on page
Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
▲
card reader.
Connects a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provides high-speed data transfer.
Depending on your computer model, reads an optical disc or
reads and writes to an optical disc.
Releases the optical drive disc tray.
White: The AC adapter is connected and the battery is fully
●
charged.
Blinking white: The AC adapter is disconnected and the
●
battery has reached a low battery level.
Amber: The AC adapter is connected and the battery is
●
charging.
Using HP
35.
Right side
5
Advertisement
Table of Contents
