Chapter 10: System Configuration
This chapter describes how to configure your StorEdge system by setting up the communication
between the system components and setting up the required a pplication. To use the StorEdge
applications, the communication board firmware (CPU) version must be 3.xxxx and later on all SolarEdge
inverters at the same site . The latest firmware version is available for download at
http://solaredge.com/storedge/firmware.
Upgrading the Inverter Firmware Version
Upgrade the inverter firmware using a MicroSD card with the latest firmware version downloaded from
the above link .
To upgrade the inverter firmware:
1. Make sure that:
The inverter has been activated using the activation card supplied with the inverter
l
The inverter ON/OFF switch is OFF
l
The AC voltage to the inverter is OFF
l
2. Remove the inverter cover.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
Chapter 10: System Configuration
81