Table of Contents
Advertisement
Configuration Menu Options
Configuration Menu Options
Country and Grid
1. Select the Country option to specify the country or region in which the inverter is installed and the
grid to which it is connected. This parameter may arrive pre-configured. If so, verify that it is set to
the proper country or region.
WARNING!
The inverter must be configured to the proper country/ region in order to ensure that it complies with
the country grid code and functions properly with the country grids.
L'onduleur doit être configuré pour le pays approprié afin d'assurer un fonctionnement convenable
avec le réseau de ce pays.
A list of countries is displayed. If no country is configured, the value is <NONE>.
NOTE
If an inverter is not configured to any country, it will not produce energy, and the following message
will be displayed on the LCD:
No Country Selected
A plus sign (+) near the country indicates that another menu will be displayed after selection.
When selecting Auto , the inverter automatically detects the used grid.
l
When selecting an option with No Neutral or No N, connection to Neutral line is not required.
l
For any other option, you must connect the Neutral line.
2. Confirm your country selection in the confirmation screen: Toggle to YES and press Enter.
Language
1. Select the Language option to set the language in which the LCD should display.
2. Confirm your language selection in the confirmation screen: Toggle to YES and press Enter.
Communication
1. Select the Communication option to define and configure:
The communication option used by t he inverter to communicate with the SolarEdge
l
monitoring platform
The communication option used to communicate between multiple S olarEdge devices or
l
other external non-SolarEdge devices, such as electricity meters or loggers.
2. Select Server to set which communication method is used to communicate between d evices and the
SolarEdge monitoring platform. Refer to Setting Up Communication to the Monitoring Platform on page
72 for a full description of these communication options.
NOTE
The Server menu shows only the communication options installed in the inverter.
The following shows a hierarchical tree of the menu options in the Communication menu.
For detailed information about all the configuration options, refer to the Communication
Options Application Note, available on the SolarEdge website at
http://www.solaredge.us/files/pdfs/solaredge-communication_options_application_note_
v2_250_and_above.pdf.
60
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
Advertisement
Table of Contents
Troubleshooting
