Chapter 4: Auto-Transformer And Backed-Up Loads Panel Installation (For Backup) - SolarEdge StorEdge SE7600A-US1 Installation Manual

Chapter 4: Auto-transformer and Backed-up Loads Panel Installation (for Backup)

Chapter 4: Auto-transformer and Backed-up
Loads Panel Installation (for Backup)
The auto-transformer is used for backup power only, and is not mandatory if using Smart Energy
Management applications only. Refer to the table on page 10.
The auto-transformer connects to the AC side of the inverter. Since the inverter AC connections are on
its right side, it is recommended to position the auto-transformer to the right of the inverter to simplify
wiring.
27
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3