Table of Contents
Advertisement
Connecting to a LAN requires an 8-pin, RJ-45 network cable.
To connect the network cable, follow these steps:
1.
Plug the network cable into the network jack (1) on the computer.
2.
Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:
TV and radio reception, orient the circuitry end of the cable toward the computer.
Sharing data and drives and accessing software
When your computer is part of a network, you are not limited to using only the information that is stored in
your computer. Network computers can exchange software and data with each other.
NOTE:
When a disc like a DVD movie or game is copy-protected, it cannot be shared.
To share on the same network:
1.
From the computer you are sharing, select Start > Computer.
2.
Right-click what you want to share, and click Properties.
3.
Select the Sharing tab, and then select Advanced Sharing.
4.
Select the Share this folder check box.
5.
Type a name in the Share name text box.
6.
Click Apply, and then click OK.
7.
To view the shared drive:
Select Start > Control Panel > Network and Internet > Network and Sharing Center.
▲
16
Chapter 3 Connecting to a network
If the network cable contains noise suppression circuitry (3), which prevents interference from
Advertisement
Table of Contents
