Speakers - HP 17g Maintenance And Service Manual

Speakers

Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
To remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable from the routing path (2).
3. Lift the speakers out of the computer (3).
NOTE:
correctly installed.
Reverse this procedure to install the speakers.
Battery on page
Optical drive on page
Bottom cover on page
When installing the speakers, make sure the rubber grommets (4) that secure the speakers are
32).
34).
41).
Component replacement procedures
Spare part number
926558-001
57