INSTALLING THE CART KIT
Parts Included:
2 x 21" long legs
2 x 23" long legs
2 x 6" Wheels
- 2 axles
- 2 cotter pins
- 2 washers
2 x 3" Threaded Casters
24 x Multi-head machine
screws
Tools Required:
Large Phillips Screwdriver or
Phillips Drive Bit and Drill
Installation:
Step 1 Attach legs to bottom shelf
The bottom portion of each of the 21" legs has a threaded plate installed to
allow for 2 casters to be installed. The 2 x 23" legs have holes punched
through to accept the wheel axles.
To ease installation, assemble leg components and shelf upside
•
down. The shelf mounting holes being on top.
Ensure that the shelf is facing with the flat surface facing downwards
•
toward your working surface.
Using a Phillips head driver, install 4 of the supplied
•
screws into each leg, to secure each leg to the shelving unit.
NOTE: It is best to start each threaded screw by hand, to ensure the
thread DOES NOT cross thread or strip.
Ensure that ALL screws are firmly, hand-tight, secured.
•
Assembly Instruction
1 Bottom Shelf
8