Installing The Cart To The Main Grill; Securing The Door Stopper, Door Magnet; Attaching The Cabinet Doors - Louisiana Grills 60815 Assembly And Operation Manual

3. INSTALLING THE CART TO THE MAIN GRILL

Parts Required:
1 x Main Grill (#7)
2 x Lift Handles (#8)
Screw (#A)
16 x
Installation:
• Prepare the main grill to be mounted to the cart. Position the cart next
to the main grill, with both facing the same direction.
IMPORTANT: Once positioned, lock the caster wheels on the cart.
• Install the lift handles by inserting them into the rear/exterior of
the back cart panel. Tilt the lift handles upward so they brace into a
locking position on the main grill. Note illustration 3A.
• Using a second person, each place one hand in the grease tray opening
(front facing) and one hand on a lift handle (rear facing). Carefully, lift
the main grill, and slowly lower the brace frame of the main grill onto
the four support legs of the cart. Once placed, secure each leg to the
brace frame using four screws. Repeat same installation for the other
three support legs. Note illustration 3B.
NOTE: When fitted properly, the main grill should be sitting level
and flush with the cart panels.

4. SECURING THE DOOR STOPPER, DOOR MAGNET

Parts Required:
Door Magnet (#15)
1 x
Door Stopper (#16)
1 x
2 x Screw (#B)
2 x Screw (#E)
Installation:
Mount the door magnet using two screws (#B) to the main grill frame.
•
Ensure the raised magnet is facing the front of the cart.
Secure the door stopper to the bottom shelf using two screws (#E) ,
•
with the raised stop facing the back of the cart.

5. ATTACHING THE CABINET DOORS

Parts Required:
1 x Cart Inside Panel (#18)
Cabinet Door Handle (#22)
2 x
Cabinet Door (#23)
2 x
10 x Screw (#B)
Installation:
• First, align the cart inside panel with the holes on the center of the
bottom shelf, on the interior of the cabinet. Secure the cart inside
panel to the bottom shelf and main grill frame using six screws. Note
illustration 5A.
8
3A
8
3B
7
4
15 + B
16 + E
5A
18
7