Set Up The Computer - HP Invent Compaq Series Getting Started

406846-001.book Page 3 Wednesday, February 8, 2006 10:36 AM

Set up the computer

To set up the computer, you will
1. Insert the battery into the computer.
2. Connect the computer to external power.
The battery begins to charge.
3. Turn on the computer.
4. Set up the software.
5. Create recovery discs (recommended).
Refer to Appendix C, "
instructions.
Ä
CAUTION: To prevent file corruption and to ensure that the correct drivers
are installed:
Do not set up the computer for the first time while the computer is
docked in an optional docking device.
During the hardware and software setup procedures:
Do not unplug the computer from external power.
Do not shut down the computer or initiate standby or
hibernation.
Getting Started
First-time setup
," for
Backup and recovery
1–3