Buttons - NETGEAR EX7500-100UKS User Manual

Nighthawk X4S AC2200 Tri-Band WiFi Range Extender
Table 1. LED descriptions (Continued)
LED Description
5 GHz Client Link LED This LED indicates the connection between the extender and a 5 GHz WiFi client:
•
•
•
•
WPS LED
•
•
•

Buttons

Figure 2. Extender buttons
The side panel contains the following buttons:
• WPS/Power button. This button acts as a WPS or Power button depending on how long you press it:
- WPS. Press the button for less than five seconds to connect WPS-enabled device.
- Power. Press the button for more than five seconds to turn the extender on or off.
• Reset button. Pressing the Reset button for about five seconds resets the extender.
Solid blue. Best connection.
Solid amber. Good connection.
Solid red. Poor connection.
Off. No connection.
Blinking blue. The extender is attempting to connect with a router or
WPS-enabled device:
Solid blue. The extender is connected to a router or WPS-enabled device.
Off. The extender is not connected to a router or WPS-enabled device.
Overview
8